| |
Lowering
the foot pegs on your XX |
| Whether it be long legs or just old legs, some riders find the height of the standard Honda Blackbird foot pegs to be a little too high - so what can be done about it? Well there are two solutions, that have been adopted by Blackbird owners worldwide. A custom design created by an XX owner or by fitting Buell foot pegs |
Custom
Design |
Dave
Strom from the US has developed his own peg lowering kit and now offers
the product to other Honda Blackbird owners worldwide - he says.....
I've been making peg lowering brackets for quite a while now These
will lower your stock pegs straight down 3/4" and will clear the
OE catted pipes. You must remove or trim your stock feelers (hero blobs)
as they will scrape with spirited riding. And
the kit consists of: |
Full
ordering details can be found at: |
Or
you can contact Dave direct by his e-mail at: davrstrom@hotmail.com |
So there you go - there is an option out there for you! If you have any information regarding Foot Peg Lowering on the Honda Blackbird, then please do not hesitate to contact us: |
